The status page says it is fixed, but the server I host with them is still down. It even says so when I log in. Not available "Due to a current error".
As far as I understand, this is exactly how ELO scores work. If a more capable show up and starts beating all the other models, it literally takes ELO points from everyone else.
It's a fitted Bradley Terry model, scaled to familiar Elo scores, anchored to wins against Mixtral-8x7B at 1114 (at least last time I looked at it). When you fit the model against historical data, and then you add another month of time that contains newer models, the relative strength of a given model might decline even if its absolute ability remained fixed.
It depends what you use as an anchor. If the anchor is a fixed model, you’re right. If the anchor is updated to a better model over time, then the elo of historical models degrades, right?
Here is my perspective as someone who has not started 3d-printing yet, but is interested to give it a try:
I'm a confused about the whole "3D printer sends prints to its manufacturer's server" issue. Because I wouldn't want to connect hardware device like a 3D-printer to a network in the first place.
Can I buy a Bambu Lab printer and just never hook it up to any network?
Will I be able to print from sd-card just fine?
Can I update the firmware from an sd-card?
If these two are possible, I would not have any problems with such a device. If they are not, I would not even think about getting such a device.
And when it comes to slicing software: Can I use any slicing software and all I have to do is load the hardware info of the Bambu Lab printer I want to use? Or do I have to use Bambu Lab Studio or a fork like Orca Slicer for some reason?
And while we are at it: Does command line slicing software exist? I wouldn't want to dabble with a GUI. I would want to define the parameters of a print job in a yaml or json file and then slice it like "./slice.sh config.yaml myobject.stl"
Could it be that this is a reasonable protection so that the average user is not being spied on via cameras in the printers when their computer gets compromised?
I guess you can do remote monitoring via Orca when you set the printer to developer mode?
::203.0.113.42 (tunnels to 203.0.113.42 over v4)
64:ff9b::203.0.113.42 (translates to v4 at nearest NAT64 point)
::ffff:203.0.113.42 (opens a v4 connection via an AF_INET6 socket)
Maybe you didn't read the draft. It's either a delayed April's Fool joke or AI slop. Even if you take it seriously, it will require updating every v4 device in existence.
I wish there was a system that lets users put up a donation that is released once a specific bug is fixed or a specific feature is implemented.
Wouldn't that be cool? The company would have a list of tasks with a dollar amount next to it.
I for one have been dabbling with a bug in ThunderBird for days now that drives me mad:
I recently created a folder in Thunderbird and called it "archive". No way would I have expected that this will lead me to a bug and will take hours out of my day: There seems to be no way to get rid of this folder anymore.
Things I have tried:
"Keep message archives in" in "Copies and Folders" is disabled. I tried temporarily enabling it, setting it to some other dir and disabling it again, that did not help.
I have disabled it in "subscribe".
I cannot rename it.
There is no "archive" folder in the web interface of my email provider, so if it Thunderbird somehow created it on the server, there seems to be no way to see, let alone delete it again in the web interface.
I tried deleting archive.msf on disk. That makes the folder disappear after the next start, but it is recreated after about a second.
I deleted folderTree.json and folderCache.json, that did not help.
You can do that. It's called a restricted donation. If you make a donation with a cover letter or a check memoizing a specific purpose and the nonprofit accepts it, then by law they're legally obligated to follow through and use that money for that purpose. With bugs it's probably easier because you can just write the bug ID on the check.
There are also a couple of bug bounty websites out there for exactly this kind of thing: you and others throw some money into the pot for fixing a given bug or implementing some feature, and coders can claim that bounty once they've written the code.
I've seen a few of these sites over the years but I can't remember the name of any RN. Search engines are your friend.
While the Flash guys had to use a native development environment and compile their stuff, I could just edit JavaScript in a plain text file and hit reload.
20 years later, and some of the same friends now swear by Swift. And have to use a native development environment and compile their stuff. While I still prefer to just edit JavaScript in a plain text file and hit reload.
I only skimmed the article, but the proposed solution seems to be that the authority (the "issuer") sends data to a device the user owns but has no control over. Like an Android or iOS phone.
The data is of such form that the phone then can pass challenges of type "are you of at least x years old" without giving out any other information.
And the user cannot share that data with other users because their phone will not let them.
P.S. `curl -fsSL https://claude.ai/install.sh | bash` works.
You can run real Claude Code and it can use Shiro's tools
like a normal Linux system.
Are you sure? I am getting this:
user@shiro:~$ curl -fsSL https://claude.ai/install.sh | bash
Installing Claude Code...
Installing packages globally...
Resolved 1 package(s):
+ @anthropic-ai/claude-code@2.1.45
22 files extracted
Created 1 bin symlink(s) in /usr/local/bin
Packages installed globally.
Claude Code installed successfully!
Run: claude
user@shiro:~$ claude
Now I get what looks like errors:
anonymous/q2<@https://shiro.computer/ line 991 > AsyncFunction:57:43
y/<@https://shiro.computer/ line 991 > AsyncFunction:9:688
...and some more like this...
The product is fully functional - you can sign up and use it right away. We have a waitlist approval step because we need to manage cloud infrastructure capacity responsibly. Once approved (usually within hours), you get full access to spin up instances immediately.
Hmm.. ok. The page does not make it look that way. It makes it sound like all you can do is get on a waiting list to then at some point in time use it for $69/month.
As for myself trying it - I think I would rather put OpenClaw on a $5/month VM myself than to pay $69/month for it.
reply